Monday, September 17, 2018

Septic tank maintenance


Septic tank maintenance

A septic tank is an underground sewage collection system. The tank itself is a watertight container constructed of a sound, durable material resistant to corrosion and decay. The most common type is concrete septic tanks. These should be constructed of a high-quality concrete to reduce the risk of premature cracking or deterioration of the septic tank. The internal walls of concrete septic tanks are coated with a durable, waterproof material, such as coal tar epoxy, to prolong the integrity of the tank.
Another option is a poly septic tank, which is made of polyethylene plastic. While somewhat more expensive to purchase, poly septic tanks are easy to install. They also are corrosion-proof and less likely to be damaged by tree roots compared to concrete septic tanks.

In recent years, premature deterioration of concrete septic tanks has been increasingly reported. While the underlying causes continue to be investigated, evidence points to formation of gases inside the tank that degrade the concrete. These corrosive gases have been possibly attributed to fermentation of food waste from garbage disposals; modern cleaning chemicals, especially products used to remove hard water lime deposits; and flushing certain medications into the system. Installing a “whirlybird” device, to vent corrosive gases from the septic tank, may alleviate the problem. If corrosion is a concern, installing a poly septic tank may be preferable.

As the septic system is used, solids—sometimes referred to as sludge—accumulate in the tank. The septic tank removes solids by holding wastewater in the tank for at least 24 hours, allowing the solids to settle and scum to rise to the top. This is accomplished by a series of baffles inside the tank. Up to 50% of the solids retained in the tank will decompose over time. Treated effluent water discharges from the tank to perforated drainpipes. The pipes are buried in a constructed absorption or “leach” field. The effluent leaves the buried drainpipes and percolates through the subsoil and eventually to groundwater.

As you use your septic system, sludge will accumulate in the tank. Properly designed tanks have enough space for up to three years of safe accumulation. Once the sludge has reached this level, the separation of solids and scum no longer takes place, and sewage may overflow into the absorption area. This can be prevented by periodically pumping the accumulated sludge.

Pumping frequency depends on the following:
  • Capacity of septic tank
  • Volume of wastewater flow
  • Volume of solids in wastewater
Volume of wastewater flow is determined by the type and frequency of common household activities, such as flushing toilets, bathing, and washing dishes. Water conservation practices in the home will help to limit the flow into the system. Using an in-sink garbage disposal will increase the volume of solids. Care should be given to the type and amount of solids disposed of through a garbage disposal. Continuous running water, from a toilet or leaky faucet, or draining of a whirlpool tub may stir up the solids in the septic tank, contributing to leakage of sludge into, and possible failure of, the absorption field.

The absorption field must be protected so the soil does not become compacted, which can prevent the drainpipes from functioning. Keep automobiles and heavy equipment off the absorption field. Grass cover and shallow-rooted plants are beneficial over the absorption field, but the deep roots of trees and shrubs stress and may plug nearby drain lines. Flood irrigation above the absorption field may also result in plugged drain lines. Do not fertilize the soil above the drain field.
Grass on the surface of an absorption field should be mowed regularly to promote evaporation and removal of water through the leaves. This helps prevent water from unnecessarily infiltrating the soil above the absorption field.

Yeasts, bacteria, enzymes, and chemicals are sold that claim to help septic systems work better; however, there is no scientific evidence that additives are effective. In fact, some cleaners allow the solids in an overloaded tank to be re-suspended and clog the drainage lines.
Additives are not an alternative to proper maintenance and do not eliminate the need for routine pumping of a septic tank.
Commercial biological additives are not necessary for restarting decomposition after pumping because the sludge residue contains active microorganisms.

Learn how to recognize problems with septic systems. For example, unusually lush and green grass over your drain field may indicate trouble. Also, pay attention to slow-draining toilets or drains, sewage odors, or sewage backing up into the house or over the drain field.

Checklist for Good Septic Tank Maintenance
  • Check your system annually for leaks and sludge.
  • Have your septic tank pumped by a licensed pumping contractor.
  • Practice water conservation. Repair leaky faucets and toilets. Spread clothes washing over the entire week, and operate washing machines only with a full load of laundry.
  • Learn the location of your septic system’s components. Make a map and keep it handy.
  • Keep a maintenance record
The week of September 17 is national septic tank maintenance week, for more information see NMSU Septic Tank Maintenance;  Guide M-113.

No comments:

Post a Comment